Overview
A highly durable, microporous, acrylic floor paint ideal for use on wood and concrete floors in both commercial and domestic settings. Bedec has formulated a floor paint with a special combination of high build self-cross linking acrylic resins that protect your floor. It contains a micro aggregate to give slip resistant properties making it ideal for warehouse floors and garages. Whilst the easy to clean surface also reduces dusting which can cause damage to electrical equipment. It is an easy to apply self-priming, satin, floor paint exhibiting low odour and quick drying.
- Satin finish - available in a range of colours
- Self Priming for easy application
- Contains micro aggregate to provide an anti-slip surface (excludes clear finish)
- Quick drying - only 2 hours
- Tough and easy to clean
- For both commercial and domestic floors
- Alkali Resistant
| Area | Interior |
| Recommended Use | Floors including cement rendering, stone, MDF, Chipboard, Hard and soft wood and most types of plastic. |
| Base | Water-Based |
| Coverage | 10-13m² per litre |
| Drying Time | 2-4 Hours touch dry, leave for 16-24 hours for use after final coat |
| Re-Coat Time | 4 Hours |
| Recommended Coats | 2-3 Coats |
| Application Method | Brush or Roller |
| VOC Levels | Low |
| Clean Up | Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning. |
Preparation
Floors can be notoriously difficult surfaces to get right, so we recommend rigorously preparing the surface for the best results.
- Remove all loose and defective paint to leave a smooth and sound surface. Glossy surfaces should be lightly abraded to provide a key.
- All algae, fungal or mould growths should be completely removed and treated with a .
- Bare steel - should be free from rust and dust before applying .
- New planed, finished wood or PSE wood - should be abraded to open the grain and allow maximum penetration.
- Knots or wood staining - Should be fully blocked with .
- Ensure any laitance is washed off and removed prior to painting.
Application
We always recommend testing a small inconspicuous area to ensure you are happy with the finished results. Please be aware colours can vary on screens.
- Preparation is always key with floors to not skip these steps as it can greatly affect adhesion and your finished results.
- Stir the product well and apply using a brush or roller.
- On new wood, cement render, or any porous substrate, the first coat should be thinned with 30-40% clean water.
- Apply two full coats allowing four hours between each coat.
- If the area is subject to heavy wear we recommend applying a third coat for extra protection.
- Allow to dry for 16-24 hours before subjecting the floor to use.
Please note that coverage will differ depending on the texture and porosity of the substrate.
Aftercare & Storage
Ensure to clean the rim of the paint tin and firmly replace the lid before storing in a cool, dry area that will protect the paint from low temperatures. Do not store it in a shed or by hanging on a hook.
Do not clean the surface with strong alkaline cleaners as this may deteriorate the surface. Clean by mopping lightly with a weak detergent solution and rinse with clean water.
